Clear Arrival Focus
Use light to identify the entrance, door line and arrival point from a distance.
Entrance and Canopy Lighting
IP65 architectural lighting for hotel, villa and commercial entrance canopies, providing clear arrival guidance, visual comfort and reliable outdoor performance.
Outdoor Lighting Design Priorities
Exterior Durability
Specify IP-rated luminaires for canopy ceilings exposed to wind, humidity or splash.
Low Glare for Guests
Avoid harsh downlight glare at the moment people look up toward signs or doors.
Safe Drop-Off Movement
Maintain comfortable illumination for vehicles, pedestrians, ramps and luggage handling.
Architectural Identity
Coordinate ceiling, facade and signage light so the entrance feels premium and coherent.
Lighting by Entrance Zone
Drop-Off Area
Use SOFT IP65 or VOLI IP65 downlights because guests need to understand the arrival point immediately. Wider beams give safe ground visibility for cars, luggage and pedestrians.
30-54 deg medium/wide
50-150 lx on ground
CRI 80+
Canopy Ceiling
Use recessed IP65 fixtures because the canopy is exposed to outdoor air but still needs a refined architectural ceiling. Low glare is important at entrances where people naturally look up to signage and doors.
24-40 deg medium
100-200 lx under canopy
CRI 80+
Door & Threshold
Use slightly higher vertical light at the door because faces, handles and glass lines must be visible. This improves safety and makes the entrance feel welcoming from outside.
24-36 deg medium
150-300 lx at threshold
CRI 80+/90
Brand Wall & Signage
Use adjustable facade or accent lights because brand elements need focus without lighting the whole elevation equally. The beam should stay on the sign or feature wall to avoid wasted spill.
15-36 deg accent
100-300 lx vertical
CRI 80+
Ramps & Steps
Use even shielded light because level changes are high-risk areas in outdoor entrances. The goal is clear visibility without glare for drivers or pedestrians.
Wide shielded
20-100 lx on walking plane
CRI 80+
Outdoor Lighting Project Support
Lighting Layout & Positioning
Application-specific luminaire positions, aiming directions and spacing for reliable outdoor lighting results.
Beam Angle & Optics Selection
Professional selection of beam angles, outputs and optical accessories for each target and mounting distance.
Samples & On-Site Testing
Sample support and night-time mock-ups to validate light distribution, glare control and visual impact.
Outdoor Finish & Protection
Finish, ingress protection and installation recommendations matched to climate and site conditions.
Project Consultation
Technical support from concept and specification through installation, aiming and commissioning.
Planning a Entrances & Canopies Lighting Project?
Talk to Artdon Lighting about optics, luminaire positioning, glare control and IP-rated products for your outdoor project.